TPSM33625RDNR

Synchronous buck power module


  • Manufacturer: Texas Instruments
  • CONEVO NO: TPSM33625RDNR
  • Package: 11‑QFN Module
  • Stock: In stock
If you have any question, please feel free to contact with us.We will reply you within 24 hours.

Details

Tags

Parameters
Mfr Texas Instruments
Type Non‑Isolated PoL Module (DC‑DC Step‑Down Converter)
Series HotRod™ QFN
Input Voltage (Min) 3 V
Input Voltage (Max) 36 V
Output Voltage 1 V to 15 V
Output Current 2.5 A
Switching Frequency 200 kHz to 2.2 MHz
Quiescent Current 1.5 µA
Output Voltage Accuracy ±1%
Topology Synchronous Buck
Synchronous Rectifier Yes
Package / Case 11‑QFN Module
Operating Temperature Range –40°C to +125°C

TPSM33625RDNR Step‑down buck power module 

The TPSM33625RDNR is a fully integrated synchronous step‑down buck power module manufactured by Texas Instruments, supplied in tape‑and‑reel 11‑pin HotRod™ QFN package with compact dimensions of 3.5 mm × 4.5 mm × 2 mm, integrating power MOSFETs, shielded inductor and bootstrap capacitor inside the single surface‑mount component. This non‑isolated point‑of‑load converter supports wide 3 V‑36 V input voltage range, adjustable 1 V‑15 V output voltage and delivers up to 2.5 A continuous output current, only requiring minimal external input and output capacitors for a complete power supply solution. Rated for ‑40 °C to 125 °C industrial junction temperature and RoHS compliant, this module eliminates complex magnetics design and loop compensation work, greatly shortening development cycles for industrial systems powered by 12 V, 24 V and 36 V fluctuating DC bus rails.

The TPSM33625RDNR is widely deployed for factory automation control hardware, 24V industrial bus auxiliary power supplies, remote I/O modules, sensor signal conditioning boards, smart building monitoring units, test‑and‑measurement instruments, and general embedded systems with wide‑range unregulated DC input sources. 

Alternative Models

1. MPM3685‑GG (Monolithic Power Systems): QFN‑packaged integrated synchronous buck power module supporting 3V‑36V wide input, adjustable output and 2.5A continuous current, optimized for cost‑sensitive industrial auxiliary power supply implementations.

2. LTM4613#PBF (Analog Devices): Compact step‑down power module with wide input tolerance, excellent thermal performance and full suite of fault protections, well‑suited for industrial point‑of‑load power conversion under fluctuating bus voltages.

3. RAA214250 (Renesas): Fully‑integrated 2.5A buck power module with wide input voltage range, spread‑spectrum EMI reduction and power‑good signal, designed for factory automation and remote sensor embedded power systems.

Contact Information
close