LTC2875IS8#TRPBF
| Parameters | |
|---|---|
| Series | - |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| RoHS Status | ROHS3 Compliant |
| Package / Case | 8-SOIC (0.154", 3.90mm Width) |
| Mfr | Analog Devices Inc. |
| Mounting Type | Surface Mount |
| Operating Temperature | -40°C ~ 85°C |
| Type | Transceiver |
| Data Rate | 4Mbps |
| Supplier Device Package | 8-SO |
| Voltage - Supply | 3V ~ 3.6V, 4.5V ~ 5.5V |
| Protocol | CANbus |
| Number of Drivers/Receivers | 1/1 |
| Duplex | - |
| Package | Tape & Reel (TR) |
| Product Status | Active |
| Base Product Number | LTC2875 |
| REACH Status | REACH Unaffected |
| Standard Package | 2,500 |
| ECCN | EAR99 |
| HTSUS | 8542.39.0001 |
LTC2875IS8#TRPBF CAN FD transceiver
LTC2875IS8#TRPBF is a rugged single-channel CAN FD transceiver from Analog Devices (Linear Technology), supplied in narrow-body 8-SOIC tape-and-reel TRPBF packaging with full RoHS lead-free compliance, rated for -40°C to +125°C industrial temperature range and dual 3.3V/5V supply compatibility, fully compliant with ISO 11898-2 and DeviceNet standards while supporting up to 4Mbps high-speed CAN FD communication. This bus transceiver integrates industry-leading ±60V permanent fault protection on CANH/CANL lines under all operating and shutdown states, ±25kV HBM ESD protection on bus pins and ±8kV ESD for logic pins, an extended ±36V common-mode input range to suppress large ground loop interference, built-in transmit dominant timeout, thermal shutdown and current-limited driver circuits to avoid bus short-circuit damage, plus a SPLIT pin for split termination voltage output and variable slew rate control to lower electromagnetic emission, with glitch-free power-up/power-down bus behavior and micropower shutdown mode consuming mere microamps of standby current for power-sensitive networked hardware.
Typical Application
LTC2875IS8#TRPBF acts as the physical layer CAN bus interface for factory industrial PLC control networks, automotive vehicle body electronics and battery management systems, building HVAC automation controllers, medical diagnostic monitoring equipment, off-highway heavy machinery communication modules, security alarm multi-node networking and battery-powered portable test instruments, its robust ±60V fault tolerance resists wiring short circuits, surge voltages and reverse polarity faults common in harsh field wiring environments, CAN FD high-speed throughput supports large-volume real-time sensor data transmission, and low-power shutdown mode extends battery runtime for remote wireless monitoring nodes deployed without continuous mains power supply.
Alternative CAN FD transceiver Models
● TJA1463T/3 (NXP): Automotive-grade CAN FD transceiver with integrated EMC optimization, optimized for vehicle powertrain networks with simplified termination circuit design.
● SN65HVD234DR (Texas Instruments): 3.3V standard CAN 2.0 transceiver with basic ±36V fault protection, cost-effective substitute for low-speed non-CAN FD industrial bus systems.
● LTC2875MPS8#TRPBF (Analog Devices): DFN8 compact pin-compatible variant with identical protection specs for ultra-small size portable embedded control hardware.
