IFX1050GXUMA1
| Parameters | |
|---|---|
| Series | - |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| RoHS Status | ROHS3 Compliant |
| Package / Case | 8-SOIC (0.154", 3.90mm Width) |
| Mfr | Infineon Technologies |
| Mounting Type | Surface Mount |
| Operating Temperature | -40°C ~ 125°C |
| Type | Transceiver |
| Data Rate | 1MBd |
| Receiver Hysteresis | 150 mV |
| Supplier Device Package | PG-DSO-8-16 |
| Voltage - Supply | 4.5V ~ 5.5V |
| Protocol | CANbus |
| Number of Drivers/Receivers | 1/1 |
| Duplex | Full |
| Package | Tape & Reel (TR) |
| Product Status | Obsolete |
| Base Product Number | IFX1050 |
| REACH Status | REACH Unaffected |
| Standard Package | 2,500 |
| ECCN | EAR99 |
| HTSUS | 8542.39.0001 |
IFX1050GXUMA1 High-Speed CAN Transceiver 1/1 Full CANbus PG-DSO-8-16
The IFX1050GXUMA1 is a robust, high-speed CAN (Controller Area Network) transceiver from Infineon Technologies, fully compliant with the ISO 11898-2 standard, designed to serve as the critical interface between a CAN protocol controller and the physical differential bus in industrial and automotive communication systems. Operating from a 4.5V to 5.5V supply voltage, it supports data rates ranging from 1 kBaud up to a maximum of 1 MBaud, enabling fast and reliable data transmission in noisy, high-interference environments. Built on Infineon's Smart Power Technology (SPT®), it integrates bipolar, CMOS, and DMOS power devices on a single monolithic chip, ensuring exceptional EMC performance, high EMI immunity, and robust operation across an extended industrial temperature range of -40°C to +125°C. Housed in a compact 8-pin PG-DSO-8 (SOIC) surface-mount package, this device features three flexible operating modes—Normal, Receive-Only, and Stand-By—controlled via the RM (Receive Mode) and INH (Inhibit) pins, alongside built-in protections against bus short-circuits, over-temperature conditions, and reverse polarity, making it ideal for long-term deployment in mission-critical industrial networks.
IFX1050GXUMA1 Application Scenarios
● Industrial Automation: PLCs, industrial fieldbuses, factory automation networks
● Automotive Electronics: Body control modules, safety systems, powertrain communication
● Embedded Systems: CAN-based sensor networks, industrial IoT gateways
● Mobile Machinery: Construction, agricultural, and material handling equipment
● Test & Measurement: Data acquisition systems, portable diagnostic tools
● Home & Building Automation: Smart HVAC, security, and access control systems
Alternative CAN transceiver Models
1. TI SN65HVD230DR: 3.3V CAN transceiver, 1 MBaud speed, 8-pin SOIC, low-power operation ideal for 3.3V microcontroller-based industrial networks.
2. NXP TJA1050T/VM: High-speed CAN transceiver, ISO 11898 compliant, 8-pin SOIC, with excellent ESD protection and thermal shutdown for automotive applications.
3. Microchip MCP2551-I/SN: 1 MBaud CAN transceiver, 8-pin SOIC, wide 4.5V–5.5V range, and built-in slope control for reduced RF interference in industrial environments.
4. onsemi NCV7356D10R2G: Automotive-grade CAN transceiver, 1 MBaud, 8-pin SOIC, featuring low-power standby and wake-up functionality for vehicle body electronics.
5. Infineon IFX1050GVIOXUMA1: Pin-compatible upgrade with enhanced ESD performance and wake-up capability, serving as a direct drop-in replacement for improved system robustness.
