74HC4051PW-Q100,11
| Parameters | |
|---|---|
| Series | Automotive, AEC-Q100, 74HC |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| RoHS Status | ROHS3 Compliant |
| Package / Case | 16-TSSOP (0.173", 4.40mm Width) |
| Mfr | Nexperia USA Inc. |
| Mounting Type | Surface Mount |
| Operating Temperature | -40°C ~ 125°C (TA) |
| Number of Circuits | 1 |
| On-State Resistance (Max) | 120Ohm |
| Supplier Device Package | 16-TSSOP |
| -3db Bandwidth | 180MHz |
| Switch Circuit | - |
| Voltage - Supply, Single (V+) | 2V ~ 10V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Voltage - Supply, Dual (V±) | ±1.5V ~ 5V |
| Current - Leakage (IS(off)) (Max) | 400nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| Switch Time (Ton, Toff) (Max) | 51ns, 42ns |
| Charge Injection | - |
| Crosstalk | - |
| Package | Tape & Reel (TR) |
| Product Status | Active |
| Base Product Number | 74HC4051 |
| REACH Status | REACH Unaffected |
| Standard Package | 2,500 |
| ECCN | EAR99 |
| HTSUS | 8542.39.0001 |
| Channel-to-Channel Matching (ΔRon) | 6Ohm |
74HC4051PW-Q100,11 analog multiplexer/demultiplexer 8:1 120Ohm 16-TSSOP
The 74HC4051PW-Q100,11 is an 8-channel analog multiplexer/demultiplexer (MUX/DEMUX) designed by Nexperia (formerly part of NXP Semiconductors), compliant with the AEC-Q100 automotive standard (Grade 1). It enables bidirectional signal routing between one common input/output (Z) and eight independent channels (Y0-Y7) via three digital select lines (S0-S2) and an active-low enable pin (E). Operating with a 2V to 10V single-supply voltage (or ±1.5V to ±5V dual supplies), it supports analog signals up to ±5V relative to ground, making it ideal for mixed-signal applications. The device features low on-resistance (60Ω typical at 9V supply), channel-to-channel matching (9Ω max), and break-before-make switching to prevent signal glitches.
74HC4051PW-Q100,11 MUX/DEMUX Applications
1. Automotive Electronics: Sensor signal routing in engine control units (ECUs), body control modules (BCMs), and infotainment systems.
2. Industrial Automation: Data acquisition systems, process control, and instrumentation.
3. Consumer Devices: Audio signal switching, battery management, and portable electronics.
4. Medical Equipment: Low-noise signal multiplexing in diagnostic devices.
5. Communication Systems: RF signal routing and antenna switching.
Alternative analog multiplexer IC Models
● ADG1607BCPZ-REEL7 (Analog Devices): A 8:1 SPDT CMOS MUX with 1.8V to 5.5V supply, 4Ω on-resistance, and 100MHz bandwidth, suitable for high-speed data acquisition.
● SN74HC4051D (Texas Instruments): A cost-effective 8:1 MUX with 2V to 6V supply, 70Ω on-resistance, and industrial-grade temperature range (-40°C to +125°C).
● MAX4617CPE+ (Maxim Integrated): A low-voltage 8:1 MUX with 1.8V to 5.5V supply, 1Ω on-resistance, and overvoltage protection for battery-powered devices.
● NLAS4597DFT2G (ON Semiconductor): A dual 4:1 MUX with 1.8V to 5.5V supply, 0.5Ω on-resistance, and rail-to-rail operation for precision analog applications.
● TS5A4594DBVR (Texas Instruments): A 4:1 MUX with 1.65V to 5.5V supply, 0.8Ω on-resistance, and ultra-low power consumption (1μA max) for IoT devices.
