OPA4197IPWR
| Parameters | |
|---|---|
| Series | - |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| RoHS Status | ROHS3 Compliant |
| Package / Case | 14-TSSOP (0.173", 4.40mm Width) |
| Mfr | Texas Instruments |
| Mounting Type | Surface Mount |
| Operating Temperature | -40°C ~ 125°C |
| Current - Supply | 1mA (x4 Channels) |
| Output Type | Rail-to-Rail |
| Number of Circuits | 4 |
| Slew Rate | 20V/µs |
| Gain Bandwidth Product | 10 MHz |
| Supplier Device Package | 14-TSSOP |
| Current - Input Bias | 5 pA |
| Amplifier Type | General Purpose |
| Voltage - Input Offset | 25 µV |
| Current - Output / Channel | 65 mA |
| Package | Tape & Reel (TR) |
| Product Status | Active |
| Base Product Number | OPA4197 |
| REACH Status | REACH Unaffected |
| Standard Package | 2,000 |
| ECCN | EAR99 |
| HTSUS | 8542.33.0001 |
| Voltage - Supply Span (Min) | 4.5 V |
| Voltage - Supply Span (Max) | 36 V |
OPA4197IPWR operational amplifier CMOS 4 Circuit Rail-to-Rail 14-TSSOP
The OPA4197IPWR from Texas Instruments is a quad, high-voltage, precision operational amplifier built on a 36V CMOS process and housed in a 14-TSSOP (PW) package, specified over the –40°C to +125°C industrial temperature range. As part of the OPAx197 family, it combines rail-to-rail input and output swing with a maximum input offset voltage of ±100 µV and a typical offset drift of ±0.5 µV/°C, enabling accurate signal conditioning in high-resolution data acquisition systems and industrial control loops. The device operates from single supplies of +4.5 V to +36 V or dual supplies of ±2.25 V to ±18 V, making it well suited for high-voltage analog front ends and PLC/DCS modules where robust signal integrity is essential.
The OPA4197IPWR incorporates EMI- and RFI-filtered inputs to suppress high-frequency interference, which is particularly valuable in electrically noisy industrial environments. Its typical quiescent current is 1 mA per amplifier, balancing precision performance with moderate power dissipation for multi-channel configurations. Packaged in a 14-pin TSSOP, it is suitable for space-constrained PCB layouts while still allowing easy prototyping and manual inspection. The combination of low offset, low noise, wide supply range, and robust output drive makes this device a strong choice for applications such as 4–20 mA loop receivers, precision current sensing, bridge sensor interfaces, and low-side or high-side signal conditioning in industrial instrumentation and motor-control systems.
Alternative low noise op amp models
● LT1679IS#PBF (Analog Devices): A quad, 36-V, rail-to-rail input/output precision op amp with 20 MHz GBW and 3.9 nV/√Hz typical noise, offering enhanced dynamic performance for low-noise, high-voltage signal chains.
● MCP6V04-E/ST (Microchip Technology): A quad, 6-V, zero-drift, rail-to-rail input/output op amp with very low offset and offset drift, optimized for precision low-voltage applications where DC accuracy is critical.
● TSZ124IPT (STMicroelectronics): A quad, 5.5-V, rail-to-rail input/output precision op amp with low input offset and low noise, targeting portable instrumentation and sensor conditioning in battery-powered equipment.
