TPS61240IDRVRQ1
| Parameters | |
|---|---|
| Series | Automotive, AEC-Q100 |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| RoHS Status | ROHS3 Compliant |
| Package / Case | 6-WDFN Exposed Pad |
| Mfr | Texas Instruments |
| Mounting Type | Surface Mount |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Voltage - Input (Max) | 5.5V |
| Output Type | Fixed |
| Number of Outputs | 1 |
| Current - Output | 500mA (Switch) |
| Supplier Device Package | 6-WSON (2x2) |
| Output Configuration | Positive |
| Function | Step-Up |
| Topology | Boost |
| Frequency - Switching | 3.5MHz |
| Synchronous Rectifier | Yes |
| Voltage - Output (Min/Fixed) | 5V |
| Voltage - Output (Max) | - |
| Voltage - Input (Min) | 2.3V |
| Package | Tape & Reel (TR) |
| Product Status | Active |
| Base Product Number | TPS61240 |
| REACH Status | REACH Unaffected |
| Standard Package | 3,000 |
| ECCN | EAR99 |
| HTSUS | 8542.39.0001 |
TPS61240IDRVRQ1 Synchronous Boost Converter
The TPS61240IDRVRQ1 is an AEC-Q100-qualified, 3.5 MHz fixed-frequency synchronous step-up DC-DC converter from Texas Instruments that delivers a regulated 5 V rail from a 2.3 V – 5.5 V input, supports battery currents up to 450 mA, and maintains >90 % efficiency while needing only three external components (2 × ceramic capacitor + 1 × 2.2 µH inductor) in a 2 mm × 2 mm WSON-6 package with <13 mm² total solution footprint .
TPS61240IDRVRQ1 boost converter Applications
● Automotive infotainment & cluster: post-boost 5 V rail for CAN, USB-OTG or SBC supplies that must survive cold-crank down to 2.3 V
● ADAS cameras & sensors: tiny footprint and low EMI (<13 mm²) fit behind CMOS imagers; Grade-3 (–40 °C to +85 °C) or Grade-2 (–40 °C to +105 °C) options support camera modules inside heated windshields
● Portable medical & IoT trackers: single Li-ion or two-cell alkaline boost to stable 5 V for RF PAs, biosensors or OLED displays while keeping standby drain <1 µA
● Industrial field transmitters: harvest energy from 1-cell Li-primary down to 2.3 V and deliver 5 V @ 200 mA to 4–20 mA loop electronics
● USB-OTG / battery-backup – true load disconnect prevents battery drain when the bus is powered by another source
Alternatives step-up converters
● TPS61240: pin-compatible non-automotive version with identical specs for industrial/consumer use
● TPS61241-Q1: 4.75 V fixed output, 2 A switch, same 2 × 2 mm WSON for higher current 5 V rails
● TPS61058-Q1: 2 MHz, 1.5 A switch, adjustable 3.3-12 V, suits 9 V or 12 V sensor bias from 3 V battery
● L6920DTR: STM 0.6 V start, 800 mA switch, adjustable 1.8-5.2 V, SC-74 if height is critical
